Your test laboratory for transport simulation

Carrying out transport tests and packaging tests

Please contact us at:
Phone 0234 / 587 - 6000
E-mail umweltsimulation@akuvib.de

AKUVIB offers packaging tests and transport simulations to simulate the mechanical and climatic stresses during storage and transport

The task of transport simulation and packaging test is to simulate by means of suitable test procedures from the field of vibration testing and environmental simulation the transport load of the prototype on its way to its later place of use.

Regardless of whether it is a question of the loads caused by transport by rail or road, or whether it is a question of simulating the extreme conditions of a sea transport or the take-off of an aircraft, the transport test shows whether the test item arrives at its destination undamaged.

Climatic chambers and salt chambers are used to simulate the special climatic conditions during transport.

The simulation of oppressions, which occur for example during the transport with an airplane, also belongs to the tests as well as the vibration test on the vibrating table.

AKUVIB has the possibilities to perform transport simulations or the packaging tests tailored to your requirements. It will be checked if your packaging meets the requirements to protect your product from damage.

Examples of our testing possibilities:

  • Shock test
  • Sine sweep
  • Random noise vibration
  • Sine over noise
  • Multiple sine
  • Climatic tests
  • Drop test
  • Vibration test
  • Negative pressure simulation