AKUVIB is your competent partner for EMC testing of products for the railway sector
EMC measurements are divided into mobile tests on site and stationary tests in our EMC laboratory.
For the stationary tests in our laboratory, we use our anechoic hall and the shielding cabins. In individual cases, EMC tests on site can also be carried out after consultation.
AKUVIB offers you the possibility to carry out the complete railway specifications (environmental simulation, vibration technology and EMC tests) at one location.
Our state-of-the-art facilities also cover the special EMC requirements of the railway sector.
Our facilities and testing equipment for the railway sector at a glance:
Measuring stations:
2 shielding cabins
1 anechoic hall SAC (8.3 x 5.2 x 4.80) m (L x W x H) with
door size 2.35m x 2.5m
3m measuring section (industry)
1m measuring section with table (automotive)
2m turntable loadable with 2t
2 x anechoic halls CISPR 25, LV 50
Performance data:
Radiated emission and immunity measurements in the anechoic hall
Emission measurements up to 6 GHz
Immunity measurements up to 1 GHz with max. 20 V/m, up to 6 GHz with max. 10 V/m
Conducted emission and immunity measurements in the shielded cabin
Surge tests
up to 5 kV, up to 3 x 63 A connected load
Burst tests
up to 5.5 kV, up to 3 x 63 A connected load
HF on lines
150 kHz – 230 MHz, various CDN and coupling clamps
Magnetic field
up to 100A/m continuous, 1000A/m short-time
ESD tests
up to 30 kV
Examples of relevant standards:
ESD
EN 61000-4-2
Radiated immunity
EN 61000-4-3
Burst
EN 61000-4-4
Surge
EN 61000-4-5
Radio frequency asymmetrical
EN 61000-4-6
Equipment in railway vehicles
EN 50121-3-2
Signalling and telecommunication equipment
EN 50121-4
Fixed installations and railway power supply equipment
